Your browser does not support JavaScript!
Department of Chemical and Materials Engineering
Department Chairman

Professor and Department Chair

Particle Technology Laboratory

Tel.: +886-3-2118800 Ext 5488

Fax: (03) 2118668

E-mail: hpkuo@mail.cgu.edu.tw

 

Experience

Department of Chemical and Materials Engineering, Chang Gung University, Taiwan

Department Chair

2016/08~

Department of Chemical and Materials Engineering, Chang Gung University, Taiwan

Professor

2012/08~

Kyushu University

Visiting Professor

2012/06~2012/08

Advanced Powder Technology (SCI Journal)

Editor

2009/08~

Department of Chemical and Materials Engineering, Chang Gung University, Taiwan

Associate Professor

2007/08~2012/07

Incubation Centre, Chang Gung University, Taiwan

Director

2005/08~2010/07

Department of Chemical and Materials Engineering, Chang Gung University, Taiwan

Assistant Professor

2002/08~2007/07

Department of Chemical Engineering, National Taiwan University, Taiwan

Postdoctoral researcher

2002/01~2002/07

 

Education

The University of Birmingham, UK

Ph.D., Chemical Engineering

2001

National Taiwan University, Taiwan

B.Sc., Chemical Engineering

1995

 

Research Fields and Expertise

1. Particle Technology

2. Particle Motion Simulation

3. Multi-phase Flow

4. Fluidization

 

Honors and Awards

1.    The best-contributed editor in 2010, 2011, 2012 and 2013 for SCI Journal Advanced Powder Technology (IF= 2.478, The Society of Powder Technology, Japan)

2.    International Organizing Committee of Asian Particle Technology Symposium since 2012

3.    Scientific Committee, PARTEC 2013, Nuremberg, Germany

4.    Guest lecturer, 22th Nisshin Engineering Particle Technology International Seminar (NEPTIS-22), February, 2014, Tokyo, Japan

5.    Invited speaker, Fluidization & Particle Processing Symposium (FB-21), Nov. 2015, Kitakyushu, Japan

6.    Invited speaker,日本化学工学会第81年会, March, 2016, Kansai University, Japan

7.    Chair, 7th Asian Particle Technology Symposium(APT2017), 30 July-1 August, 2017, Taoyuan, Taiwan

 

 Recent Publications

1.       H.P. Kuo*, B.R. Hou and A.N. Huang, 2017, "The influences of the gas fluidization velocity on the properties of bio-oils from fluidized bed pyrolyzer with in-line distillation", Applied Energy, in press.

2.       A.N. Huang, C.P. Hsu, B.R. Hou and H.P. Kuo*, 2017, "Production and separation of rice husk pyrolysis bio-oils from a fractional distillation column connected fluidized bed reactor", Powder Technology, in press.

3.       H.P. Kuo*, S.W. Yao, A.N. Huang and W.Y. Hsu, 2017, "Photocatalytic degradation of toluene in a staged fluidized bed reactor using TiO2/silica gel", The Korean Journal of Chemical Engineering, 34(1), pp. 73–80.

4.       A.N. Huang, N. Maeda, D. Shibata, T. Fukasawa, H. Yoshida, H.P. Kuo and K. Fukui*, 2017, "Influence of a laminarizer at the inlet on the classification performance of a cyclone separator", Separation and Purification Technology, 174, pp. 408–416.

5.       H.P. Kuo*, H.A. Tsai, A.N. Huang and W.C. Pan, 2016, "CIGS absorber preparation by non-vacuum powder-based screen printing and far infrared RTA densification", Applied Energy, 164, pp. 1003-1011.

6.       H.P. Kuo*, W.T. Tseng and A.N. Huang, 2016, "Controlling of segregation in rotating drums by independent end wall rotations", KONA Powder and Particle Journal, 33, pp. 238–248.

7.       C.Y. Li, S. Appari, L.X. Zhang, A.N. Huang, H.P. Kuo, S. Kudo, J.I. Hayashi, K. Norinaga*, 2015, "Modeling of gas/particle flow in coal conversion with a drop tube reactor using a lumped kinetic model accounting volatiles char interaction", Fuel Processing Technology, 138, pp. 588–594.

8.       C.Y. Cheng, A.N. Huang and H.P. Kuo*, 2015, "Preparation of the diffuser films using a 1700 mm wide reverse mode gravure coating system", Journal of Chemical Engineering of Japan, 48(4), pp 1–7.

9.       郭修伯,2015化腐朽為神奇-以長庚大學與台塑石化公司副產石灰產學合作案為例,台塑企業雜誌46(4)7月號,pp. 300–306

10.    郭修伯,2015粉末登場,科學發展月刊,513 期,9月號,pp. 4–5

11.    郭修伯、黃安婗,2015你是風兒我是沙流體化床,科學發展月刊,513 期,9月號,pp. 10–15

12.    H.P. Kuo*, C.F. Yang, A.N. Huang, C.T. Wu and W.C Pan, 2014, "Preparation of the working electrode of dye-sensitized solar cells: effects of screen printing parameters", Journal of the Taiwan Institute of Chemical Engineers, 45, pp. 2340-2345.

13.    A.N. Huang and H.P. Kuo*, 2014, "Developments in the tools for the investigation of mixing in particulate systems - a review", Advanced Powder Technology, 25, pp. 163-173.

14.    H.P. Kuo*, H.Y. Tseng, A.N. Huang and R.C. Hsu, 2014, "A study of the ash production behavior of spent limestone powders in CFBC", Advanced Powder Technology, 25, pp. 472-475.

15.    H.P. Kuo*, C.T. Wu, 2014, "Speed up dye-sensitized solar cell fabrication by rapid dye solution droplets bombardment", Solar Energy Materials and Solar Cells, 120(A), pp. 81-86.

16.    C.Y. Cheng, Y.N. Yang, A.N. Huang and H.P. Kuo*, 2013, "Steam hydration of CFBC bottom ashes in a rotary kiln", Journal of the Taiwan Institute of Chemical Engineers, 44(6), pp.1060-1066.

17.    H. Yang, S. Kudo, H.P. Kuo, K. Norinaga, A. Mori, O. Masek, J. Hayashi*, 2013, "Estimation of enthalpy of bio-oil vapor and heat required for pyrolysis of biomass", Energy & Fuels, 27(5), pp. 2675-2686.

18.    A.N. Huang, L.C. Liu, and H.P. Kuo*, 2013, "The role of end wall shearing in the drum segregation band formation", Powder Technology, 239, pp. 98-104.

19.    A.N. Huang, W.C. Kao and H.P. Kuo*, 2013, "Numerical studies of particle segregation in a rotating drum based on Eulerian continuum approach", Advanced Powder Technology, 24(1), pp. 364-372.

20.    C.T. Wu, H.P. Kuo*, H.A. Tsai, W.C. Pan, 2012, "Rapid dye-sensitized solar cell working electrode preparation using far infrared rapid thermal annealing", Applied Energy, 100, pp. 138-143.

21.    A.N. Huang and H.P. Kuo*, 2012, "A study of the three-dimensional particle size segregation structure in a rotating drum", AIChE Journal, 58(4), pp. 225-229.

22.    A.N. Huang and H.P. Kuo*, 2011, "A study on the transition between neighbouring drum segregated bands and its application to functionally graded material production", Powder Technology, 212(3), pp. 348-353.

23.    H.P. Kuo*, S.M. Pan, and H.T. Hsu, 2011, “Comparisons of the hydrogen-rich syngas compositions from wet rice husk slurry steam reforming reactions using different catalysts”, Biomass & Bioenegy, 35(7), pp. 3025-3031.

24.    H.P. Kuo*, C.T. Wu and R.C. Hsu, 2011, “Continuous toluene vapour photocatalytic deduction in a multi-stage fluidised bed”, Powder Technology, 210(3), pp. 225-229.

25.    H.P. Kuo* and C.H. Cheng, 2010, “The comparison of the elastic properties of the particle assembly in a vibrator determined by the top cap method, the apparent mass method and the energy dissipation method”, Journal of the Taiwan Institute of Chemical Engineers, 41(2), pp. 239-243.

26.    H.P. Kuo*, C.T. Wu and R.C. Hsu, 2009, "Continuous reduction of toluene vapours from the contaminated gas stream in a fluidised bed photoreactor", Powder Technology, 195(1), pp. 50-56.

27.    H.P. Kuo*, M.Y. Chung, and C.C. Lin, 2009, "Design correlations for the optical performance of the particle-diffusing bottom diffusers in the LCD backlight unit", Powder Technology, 192(1), pp.116-121.

28.    H.P. Kuo*, H.Z. Zhang, and R.C. Hsu, 2008, "CFD modelling of a countercurrent staged fluidised bed ", Chemical Engineering Journal, 137(3), pp.664-676.

29.    H.P. Kuo* and Y.W. Chen, 2008, "The determination of the state transition of the granular materials in a vibrating bed using a novel optical signal analysing method", Advanced Powder Technology, 19(1), pp. 61-71.

30.    H.P. Kuo* and M.L. Ku, 2008, "On the plate design in a countercurrent single-stage fluidized bed system ", Advanced Powder Technology, 19(1), pp. 13-24.

31.    H.P. Kuo* and C. Y. Cheng, 2006, "Investigation of the bed types and particle residence time in a staged fluidised bed ", Powder Technology, 169, pp.1-9.

32.    H.P. Kuo*, Y.C. Hsiao and P.Y. Shih, 2006, "A study of the axial segregation in a rotating drum using deformable particles", Powder Technology. 166, pp.161-166.

33.    H.P. Kuo*, P.Y. Shih, and R.C. Hsu, 2006, "Coupled axial-radial segregation in rotating drums with high fill levels", AIChE Journal., 52(7), pp. 2422-2427.

34.    H.P. Kuo*, R.C. Hsu, and Y. C. Hsiao, 2005, "Investigation of Axial Segregation in a Rotating Drum", Powder Technology, 153, pp.196-203.

35.    H.P. Kuo*, P.C. Knight, D. J. Parker, and J.P.K. Seville, 2005, "Solids Circulation and Axial Dispersion of Cohesionless Particles in a V-Mixer", Powder Technology, 152, pp.133-140.

36.    H.P. Kuo, P.C. Knight, D.J. Parker, M.J. Adams and J.P.K. Seville*, 2004, "Discrete Element Simulations of a High Shear Mixer", Advanced Powder Technology, 15(3), pp.297-309.

37.    H.P. Kuo, A.S. Burbidge, P.C. Knight, D.J. Parker, M.J. Adams, and J.P.K. Seville*, 2003, "Non-Equilibrium Particle Motion in the Vicinity of a Single Blade", Powder Technology, 132, pp. 1-9.

38.    S.P. Ju, W. M. Lu*, H.P. Kuo, F.S. Chu and Y. C. Lu, 2003, "The Formation of a Suspension Bed on Dual Flow Distributors", Powder Technology, 131, pp.139-155.

39.    H.P. Kuo, P.C. Knight, D.J. Parker, Y. Tsuji, M.J. Adams, and J.P.K. Seville*, 2002,  "The Influence of DEM Simulation Parameters on the Particle Behaviour in a V-mixer", Chemical Engineering Science, 57, pp. 3621 - 3638.

40.    H.P. Kuo, Y.S. Fangary, D.J. Parker, M. Barigou, and J.P.K. Seville*, 2001, "Validation of Numerical Simulations of Mixing Using PEPT Experiments", Chemie Ingenieur Technik, 73(6), pp.642 - 642.